- Notes, cautions, and warnings
- Working on your computer
- Removing and
installing components
- Recommended tools
- Screw size list
- Subscriber Identification Module (SIM) card
- Base cover
- Battery
- PCIe Solid State Drive (SSD)
- SATA Solid State Drive (SSD)
- Speaker
- Coin cell battery
- WWAN card
- WLAN card
- Memory module
- Heat sink
- Power connector port
- LED board
- Smart card module
- Touchpad buttons board
- Display Assembly
- Display hinge cap
- System board
- Keyboard assembly
- Keyboard
- Palm rest
- Technology and components
- Software
- System specifications
- Processor specifications
- System specifications
- Memory specifications
- Video specifications
- Audio specifications
- Battery specifications
- AC adapter specifications
- Port and connector specifications
- Communication specifications
- Touchpad specifications
- Camera specifications
- Display
- Dimensions and Weight
- Environmental specifications
- System setup
- Boot menu
- Navigation keys
- System setup options
- General screen options
- System Configuration screen options
- Video screen options
- Security screen options
- Secure Boot screen options
- Intel Software Guard Extensions screen options
- Performance screen options
- Power Management screen options
- POST Behavior screen options
- Virtualization support screen options
- Wireless screen options
- Maintenance screen options
- System Log screen options
- Updating the BIOS in Windows
- Updating your system BIOS using a USB flash drive
- System and setup password
- Troubleshooting
Dell Latitude 7380 Owner's Manual
POST Behavior screen options
- Option
- Description
- Adapter Warnings
- Allows you to enable or disable the system setup (BIOS)
warning messages when you use certain power adapters.
Default setting: Enable Adapter Warnings
- Keypad (Embedded)
- Allows you to choose one of two methods to enable
the keypad that is embedded in the internal keyboard.
- Fn Key Only: This option is enabled by default.
- By Numlock
- Mouse/ Touchpad
- Options:
- Serial Mouse
- PS2 Mouse
- Touchpad/PS-2 Mouse (Default)
- Numlock Enable
- Allows you to enable the Numlock option when the computer
boots.
This option is enabled by default.
- Fn Key Emulation
- Allows you to set the option where the Scroll Lock
key is used to simulate the Fn key feature.
Enable Fn Key Emulation (default)
- Fn Lock Options
-
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary behavior of these keys. The available options are:
- Fn Lock. This option is selected by default.
- Lock Mode Disable/Standard (default)
- Lock Mode Enable/Secondary
- Fastboot
- Allows you to speed up the boot process by bypassing
some of the compatibility steps. The options are:
- Minimal
- Thorough (default)
- Auto
- Extended BIOS POST Time
- Allows you to create an additional preboot delay.
The options are:
- 0 seconds. This option is enabled by default.
- 5 seconds
- 10 seconds
- Full Screen Logo
- The option Enable Full Screen Logo is not selected by default
- Warning and Errors
-
Options:
- Prompt on Warnings and Errors (default)
- Continue on Warnings
- Continue on Warnings and Errors
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\